Sniper Elite 5 Authentic Gameplay – Mission #4 War Factory
Sniper Elite 5: Mission 4 (War Factory) map and description – walkthrough Sniper Elite 5 guide, walkthrough
Martressac War Factory is a location from mission 4 of Sniper Elite 5. In our guide you will find its world atlas map with important locations and secrets.
https://youtube.com/watch?v=B-oZeAuBTb0
The first part of our walkthrough for Mission 4 (War Factory) or Sniper Elite 5 is the world atlas map. On the map, we’ve marked important locations all around the facility, where the main hero will conduct acts of sabotage. Moreover, we list the hazards (e.g. an armored vehicle ) as well as allsecrets and collectibles (there are 19 present in this level)
The most important locations on the Martressac map
- Dam – 2 on the map
After approaching the dam, you need to decide on what path to choose to reach the main area of the factory – you can walk along the dam or use one of the available zip lines.
- The central area, armored vehicle – 4 on the map
The middle part of the map is patrolled by an enemy armored vehicle and avoiding it can be troublesome. In order to destroy this machine, you need mines, TNT, or a Panzerfaust (you can find one in the refinery).
- Railway station office – 7 on the map
This is one of the alternative starting points of the mission – you can reach this location through a side path. Certain objectives of the mission take place near the railroad tracks, including a Kill List Target.
- Refinery – 8 on the map
This is one of the buildings that has to be sabotaged. You can enter the refinery through one of the main entrances or via the upper footbridge. Inside, you have to reach the terminal, watching out for, among others, an elite sniper.
- Warehouse – 10 on the map
This is another mandatory location to explore. You have to get to the safe on the upper floor of the warehouse and steal the manifest from it . You can open the safe by blowing it up or taking the key from the officer in the building.
- Main furnace– 11 on the map
This is the largest location on the map – your objective here is to sabotage the furnace. The main paths (north and south) and the secret one from the steelworks side lead inside. You can destroy the furnace by overloading it.
Mission 4 – general information
The setting for the fourth stage of Sniper Elite 5 is the titular Martressac war factory . This level has a large number of main and side objectives, but they aren’t too complicated and you should deal with them in a timely fashion.
Among others, you’ll have to deal with an armored vehicle that patrols the central part of the factory – if you want to explore the map for collectibles safely, consider destroying the vehicle. We’ve listed the possible ways of destroying the vehicle – you can find them on the next page of the guide.
By default, the mission starts in a resistance hideout , but you can unlock alternative starting locations during the course of the level, and in our opinion, the best location of such type is the Western railroad tracks, thanks to which you will immediately start closer to all the main objectives of the mission. In case of the default starting location, you must first reach the main area of the factory either by following the dam or using a zipline – both of these variants present the same challenge. .
Mission 4 has various main and side quests. We discussed them on the following pages:
- Infiltrating and exploring the factory – this is the first objective of the mission, involving reaching the main part of the facility. Your exploration of the facility may be hindered, among others, by a patrolling armored vehicle – you can choose to destroy it.
- Sabotaging the Factory – this task is divided into three main objectives. Two of them involve sabotage (Destroy the Furnace, Destroy the Refinery) while the third involves Finding the Kraken Shipping Manifest. Along the way to the objectives, you visit three main areas of the factory.
- Side objectives – in Mission 4, there are 2 side tasks to complete, involving sabotaging the generator and destroying the Steelworks. Both of these objectives involve visiting unique areas of the map.
- Matthaus Ehrlich – a Kill List Target to which a challenge is related. The challenge involves killing Ehrlich with a rat bomb – you can view our walkthrough to learn how to get the bomb and use it on the target.
There are 19 collectibles to find during Mission 4. Among them, are 3 workbenches, and various types of letters or documents. We have marked their locations on the map.